Issue#4860: Radio Control - Goblin Gasser WooKong Project

  • Well its cold out, and i always wanted to get a WooKong H and now i want to install on my baby, The Goblin 700 Gasser, so Problem is, there is not alot out there on this unit and i desperately in need of help!, caz on the DJI forum they all say "pretty straight forward just read manual"" so that what ill do, but if anyone has tips on mounting and setup radio first, and just any thing you can throw out there would be great

    1. i 3d printer a goblin 700 gps mount..........wookong cheasy, dont fit right
    2. im in the process of printing a RX tray for goblin for front over top start gear to house the WooKong And Transmitter RX
    3. i might need something for the led for the rear of Goblin
    4. where is good place to put units, i have an idea, but i need to be sure
    5. i have a choice between a Futaba T8FG super, Or Spektrum dx7s, need info on that, i know about the 2 radios, just want to hear shout outs on what people think,
    6. i dont mind critics, never do, i learning more and more each day
    7. i will be ordering a stator gator for the trm motor, caz WooKong requires it.
    8. should i leave washer the was dampaning VIBS on ikon..?????

    Attached Thumbnails
  • Views: N/A

  • Views: N/A

  • Views: N/A

  • Views: N/A

  • Views: N/A

  • Views: N/A

  • Views: N/A

  • Views: N/A

  • Views: N/A

  • Views: N/A

  • Views: N/A

  • Views: N/A

  • Views: N/A

  • Views: N/A

  • Views: N/A

  • Views: N/A

  • Views: N/A

  • Views: N/A

  • Views: N/A

  • 0 Answers

    Sorry, your answer is too short !

  • Issue#55767: Radio Control - Dji Lightbridge and WooKong-M issue on Evo S800

    Hi, I am desperate for help with connecting the Lightbridge to the WooKong-M on the Evo S800 using Futaba radios, we originally used the AVL58 transmitters but have swapped it out for the DJI Lightbridge, we cannot find any information on how to connect everything together, we can connect to the HD GH4 Gimbal ok but when we connect the Lightbridge Bus cable to the X2 port on the WooKong-M, we have a major problem, the motors startup right away!!! Very dangerous, can you help us with a diagram or detailed description on how to connect the DJI Lightbridge with the WooKong-M flight controller please we need to be flying again as soon as possible. Do we need special settings on the Futaba 14SG radio? can you help us to solve the instant motor startup issue? Thanks in advance. First time posting!

  • Issue#847904: Radio Control - Custom Goblin 770 comp gasser

    Ok , I built this from new , no expense spared , built it to fly but just haven't had time for it. Started with the newest comp 770 airframe with metal main gear . After build I have canopy , boom and tail fin all custom painted. Since the build I have less than a gallon on the 300tt pro motor so it is just barely broke in. Heli has ZERO hard flights, since motor still so fresh. The hitori pipe sounds amazing! Don't miss out, I spent huge money on this build , asking $2500 for it bnf to spektrum with Vbar. Buyer pays shipping but I'll cover PP fees [email protected] Still Pics taken couple days ago, flight pic was taken on maden. Sent from my iPhone using Tapatalk

  • Issue#901: Radio Control - Park zone Sport Cub aileron issue

    Park zone Sport Cub First flight ended with a crash, bent prop, ed nose cowl Replaced parts Getting airplane ready for my second flight with it and I noticed that the right aileron is a few degrees down with the stick centered. Any ideas? And yes, I'm new at this. And yes I've thoroughly checked out all the transmitter settings,servos,links,horns, clevises, etc.. Thanks guys for any advice

  • Issue#1923: Radio Control - SW capacitor/ librepilot issue HELP!!

    Hi all, I have a problem.. My Eachine landed from about a metre flat on its belly and the SW capacitor came off, and one off the connecting pins broke so I replaced with a 470uf 25v from maplin.. LibrePilot takes longer than usual to choose the FC in wizard then on setting the motor start points that SW motor runs seemingly slower and rattly, then on saving the wizard settings it gets to preparing mixer settings and crashes there. That's about as much info as I have as I'm new to this and only had my Eachine 2 days Thanks in advance

  • Issue#3839: Radio Control - SkyZone 5.8Ghz 200mw Range issue

    Hi! i am very new to Quad flying and am having a little trouble with my FPV Setup, i purchased the Quanum V2, http://www.hobbyking.com/hobbyking/s...Tx_Rx_Set.html, and the Quanum Nova quad, been having heeps of fun flying but when i tried to get the goggles to work i was getting less than 15m without the no signal warning, i have the Transmitter mounted inside the quad with the antenna poking out between the two front rotors, ( i can post a pick if you need) is there something interrupting the signal because of this mounting point? when i am next to the drone the signal is clear as day without much static at all, any ideas why this is happening? Thanks!!!

  • Issue#6526: Radio Control - HPI wheely king parts/project/slider

    HPI wheely king parts lot, project, slider. well used, disassembled, wheely king. its a complete slider, just all apart. chassis, axles,trans,driveshafts, axle mounted servo plate, rear axle lockout, shocks, suspension link mounts, extra pieces/parts. all works good, beat on and dirty. put it back together and make a tough basher. $125. might trade, not looking for anything, NO nitro, helis under 1/10th scale or off-brand stuff. message here, call or text 2708602323 Attached Thumbnails Views: N/A Views: N/A Views: N/A Views: N/A Views: N/A

  • Issue#6532: Radio Control - tamiya semi/hi-lift/bruder/trials truck scaler project

    this is a project/compilation of parts i gathered together and just haven't had time for it to materialize. the frame is 1/14 tamiya king hauler semi chassis, axles are tamiya hi-lift with leaf springs and hangers, transmission is tamiya hi-lift 3-speed as well. has chrome fule tanks and bumpers. comes with hi-lift slide-in battery tray. cab is a bruder toys MAN TGX semi truck. was going to build a dakkar style trials truck out of it. $250 for all of it. NO, i am not seperating any of it, YES, i will trade for other tamiya trucks only. message here, call or text 2708602323 Attached Thumbnails Views: N/A Views: N/A Views: N/A Views: N/A Views: N/A

  • Issue#8246: Radio Control - Uncontrollable Yaw Issue

    I have an F330 clone frame that has an Openpilot CC3D FC, HK 25/30a ESC's and Propdrive 28-26s 1200kv motors. I hooked it up to the Openpilot GCS and went through the FC and transmitter configuration steps. The problem is that after arming and taking off, it wants to continually yaw left and kind of bounce up and down making it hard to control. I checked most settings and everything looks fine including the motor RPM speed sliders as well as I completed the ESC calibration and double checked that the props are on correctly. I also looked on my Turnigy 9xr controller settings and it looks like it is correct. I am not sure what to do next. This is not my first quad but I am clueless what to do next. Everything is new with the exception of the ESC's and motors. Thanks! John

  • Issue#10704: Radio Control - Goblin 700 KSE

    Brand new KSE 700, BK 8002/8005 servos, AR7200, Talon 120 with fan , Scorpion 4525-520 ultimate, 2 test hovers to set the tail. $2500 shipped and PP to lower 48, NO TRADES!! Attached Thumbnails Views: N/A Views: N/A Views: N/A Views: N/A Views: N/A Views: N/A Views: N/A

  • Issue#11626: Radio Control - Issue with TDisaster

    Just wanted to get the word out- I bought a battery from TDisaster. He was extremely responsive on the day I pm'ed him about buying the battery and was quick to take my money, but all but disappeared afterwards. Payment sent on 1-11-16. About a week after I sent payment, 1-17-16, I sent him a PM asking for the tracking info because I should have received the battery by then. A couple days went by then he said that he was too busy and didn't get it out but that he would do so shortly. That was a week and a half ago and I still have no battery and he hasn't replied to a PM in ~four days. It's now 1-26-16 and still no battery or response. Here is the original FS thread http://www.rcgroups.com/forums/showthread.php?t=2569355 I'll update if I hear anything or if there ends up being a positive resolution. Just wanted to get the word out since he has some other stuff for sale too. EDIT: And now his PM box is full.

  • Issue#11927: Radio Control - SkyRC Quattro B6AC issue

    This is the second SkyRC Quattro B6AC I have and both seem to have the same issue. One of the four charging circuits has given up the ghost. This one pictured the top right gave up and the second the bottom right. I emailed SkyRC and of course no response to 2 emails for customer service. I opened up the unit itself in hope it was four separate charging circuits boards and I could find a replacement or combine for one functioning charger. Question is anyone had this issue with this brand or Hitech they are identical in every way. If so were you able to trouble shoot the problem? Attached Thumbnails Views: N/A

  • Issue#12861: Radio Control - Walkera qr x3560 pro gps issue

    Hi Guys... Greetings from Barcelona.. i am new on this forum and i hope you can help me out with this issue. I've got a walkera qr x350 pro since few months already with over 30 hrs flight and never had an ssue till last week when my GPS started having some problems of connections. I followed all procedure as usual but after callibration, the gps light didn't start blinking as it used to do in the past so i could not fly on gps mode. I opened but everything seems ok inside...it might be the antenna or something else? I would need your advices whenever possible Many thanks in advance

  • Issue#16285: Radio Control - Goblin HPS3 3 blade head. New in sealed package.

    Goblin HPS3 3 blade head. Use on the Goblin 630/700/770 competition/Speed/Urukay Head H0430-S Head - 280.00 shipped and PayPal only Make an offer! I purchased this from another member. I am really looking for the Black anodized from the Goblin 700 KSE. Everything is in sealed packages. Blades not included. Attached Thumbnails Views: N/A Views: N/A

  • Issue#17309: Radio Control - SAB GOBLIN 380 with EXTRAS!!!

    Hi guys here's a really nice Goblin 380. Includes Castle Lite 75 ESC Castle 10 amp Bec running at 7.4v 2 Quantum 880kv motors 2 pulse 1800mah lipos W/ trays BK 3001 cyclic servos BK 5005 tail servo. Has aluminum servo mounts. Stock ones included. Lynx tail bell crank Set up with 12 degrees pitch. All original boxes. Halo 385mm main blades Stock plastic tail blades. Currently running 23 tooth main pulley 2400/2600/2800 governed headspeed. 21 tooth pulley included Has speed up tail pulley installed. Stock will be included. This heli is in great condition. I just tore it completely apart and cleaned everything. All solder connections are perfect. Bearings all good. I will also be including a new tail belt and motor belt. Not in pic. It is to be here this week from amainhobbies. Just wanted to freshen it up. It flies awesome! Moving on to a Nitro project. The VBAR NEO w/ VLINK IS NOT INCLUDED. if you want it its an extra 350$. Has Pro software w/ rescue. Please feel free to ask

  • Issue#17569: Radio Control - Android HOTT Viewer App Issue

    Hi guys. Has anyone else experienced the issue of Rx and Tx Reciever signal data not being shown using the HOTT Viewer App on a Samsung Galaxy 3 ? Any ideas? Attachment 8646219 Attached Thumbnails Views: N/A

  • Issue#20416: Radio Control - Glider project

    Good project...airframe is fine...seems to me that the esc failed... Good for someone with some parts and skills. Not junk at all, worth the time Attached Thumbnails Views: N/A Views: N/A Views: N/A Views: N/A

  • Issue#21656: Radio Control - Solar Powered UAV - Master's Degree Project

    Brand new member, I've been trawling the forum for months getting information for this build so I thought it would only be fair to start a build thread, and input and comments from the knowledgeable people on here would be greatly appreciated. The brief we drew up for ourselves was to build a UAV capable of long endurance [specified as longer than 6 hours] that is capable of collecting data [Photos, Videos, Atmospheric data etc]. This has led us onto the design we currently have: General Aircraft: High mono-wing, with transition to dihedral Twin booms to a 'H' tail ['A' Tail under discussion] Fuselage mounted under the wing Landing gear placed outboard, on the wing Aircraft Dimensions: 3.5m Wingspan 2m Length Control: Pixhawk control augmentation, with full autonomy available Ground Transmitter Laptop base station Power: 78 SunPower Maxon Solar Cells BlueSolar 75/15 MPPT 2100mAh LiPo Battery Turnigy SK3 2836 1500kv NeuMotors Maxon P22 4.4:1 Planetary Gearbox Aeronaut CAM Carbon 20

  • Issue#24521: Radio Control - DJI Wookong Flight Controller w/V2 GPS

    Selling off this extra DJI WKM FC . I sold my hex that this FC was on so no use for it now. Was flawless during every flight. In great shape. Has a minor cosmetic mark on the top of the puck. Never crashed, but just from transporting it in my truck before I got a dedicated pelican case. Every function works perfectly. GPS locks quick and performs with zero issues. Asking $425 obo. Price includes shipping to conus or HI and paypal. Attached Thumbnails Views: N/A

  • Issue#26371: Radio Control - FTDI Adapter issue?

    Hi, I am having weird issue with my silabs ftdi adapter with windows 10. First, I have the driver installed. I have been reading around seeing that FTDI has installed an update in windows that bricks any (knock off) FTDI chips. Is this a result of it? Background, I had Windows 10 pro since it first released. I have flashed a minimosd or two within that time with this same FTDI adapter with no issues. I recently cleaned my desktop with a fresh install of Windows 10 pro. Anyone know what or why this is happened? Thank you. http://www.readytoflyquads.com/cp2102-usb-adapter (note I saw a few videos of Arduinos getting bricked as well. Could something have happened to where I bricked this?

  • Issue#28097: Radio Control - Power issue

    Hello, New here and just trying to get into a multirotor hobby, so I purchased the LS 128 Sky Hunter. Flew it for a bit, crashed the heck out of it, but it is pretty durable...and now have a quick issue. When I full power it, it remains at about half power and it doesn't come off the ground, but...when I yawl it right at full power, it goes to full power...yawling left full power does nothing. So 2 of the motors are engaging full power (yawl right) and 2 are not. I have made no modifications to it. Sounds like there is a disconnect somewhere, but I am not sure where to begin. I took the unit entirely apart and all wires seem to be connected. Anybody have any ideas?? Thanks

  • Issue#30476: Radio Control - Quad drops out of the air, suspect Emax 1806 2300kv de-synch or motor issue?

    Hi All, I was hoping some quadcopter experts could help me diagnose a quadcopter issue. I have a ZMR250 quad (had about 1 month) with naze32 FC, 4x DYS BL20A ESC and 4x Emax 1806 2280KV motors. The issue i'm having is that the quad sometimes just drops out of the air! I can fly for a while then it just drops out of the sky, once it occurs it seems to re-occur more frequently. When it occurs the motor does not feel hot. I don't think its a power delivery issue, it flys ok for a while till the issue occuers, all motors connect to the same power distribution board and the connections are good, if it was a power issue I think other motors/ESCs would have the issue too. I'm using 1300mAH 45C battery which should be fine. This has been happening for a few weeks now or at least more frequently over the past few weeks. Trouble shooting I have tried: 1) Checked all connections 2) Initially I would stop the motors to prevent damage when it crashed. I searched for possible issue and I think it

  • Issue#33094: Radio Control - DX 9 Issue

    I want people that own the DX 9 Transmitter to know of a problem I have found when trying to set gain values for your Aircraft. My example is what happens when trying to set gain values in Servo Setup. The setup is as follows. Flight Mode Setup Aux 2, 3 position switch for my Gyro Go to Servo Setup and stay in Travel. Go to AX2 and set your gain value to 15 for the top value and 20 for the lower value. Flip the switch and notice that even though it is calling out Mode 1, 2 and 3 both top and bottom values show as selected and will both change at the same time. You might have to go a little lower with the values for this to happen but non the less it will happen. Once this happens you will not be able to set flight mode 3 and both upper and lower values will be selected and will change without you knowing (assuming your looking at your plane while flying and setting the gain without looking) In short you might think you flipped your gyro off to land only to find out that the g

  • Issue#35645: Radio Control - fatshark teleporters v3 viewing issue

    I have a fatshark teleporter v3 rtf system,no matter how i place the googles on my face,theres always a blurred image .....heres why. It seem like the lenses are too close together,or my eyes are too far apart. If i shift googles left,left lens is clear,right is blurry and vise versa. Is there a way to resolve this? Has anyone sucessfully moved the lens,or lcd over slightly to correct this issue? If i mod it,move just the lenes over slightly.....would the focus be altered? Im only needing to move each lens about 1/8 further away from center. But i would hate to ruin a nice pair of googles.

  • Issue#35652: Radio Control - delta ray issue

    just got a delta ray,but it will only fly in safe mode,will not fly in intermediate or expert mode,when I switch to these modes it turns to the left and nosedives,panic button works but when released in these modes,crashes,any ideas? :confused:

  • Issue#36613: Radio Control - Lights that shine/project along a surface?

    Gday all I was wondering if anyone could put a name or link to the sort of light that I've seen on night flyers that is more of a beam or spotlight as opposed to a strip of LEDs that is generally mounted on a wing tip and projects in towards the fuselage, lighting up all the wing aswell, for example... I'm looking to knock up a night flying rig for my Fun Cub that can be easily removed/attached for day or night dutys. So I'm hoping these lights are available in some smaller form factors as I've only seen them on huge 100" gasser 3D birds. Any info would be much appreciated. - Scott

  • Issue#39522: Radio Control - Tarot Retract issue

    Having issue with Tarot retracts on latest build. One leg only travels half way when wired up to LG controller. Plugged into either side produces same results. Figured it was the leg. But seems to work fine when powered directly and bypassing controller. If the problem is the control unit, why no issue with other leg? Is this fixable / tune-able? Adjusting endpoints / travel in TX does nothing. Or should I roll the dice an order new controller? Any input is appreciated. https://www.youtube.com/watch?v=BZ-4G7qIG84

  • Issue#40238: Radio Control - Goblin 380 new blades and battery.

    Brand new set of blades (tail and mains) Mint condition pulse 1800mah 45c 6s with the battery trays and strap. Paid $130 for everything at heli direct. Save 40 bucks here. I'm not going to need these anymore. $90 shipped. Thanks Attached Thumbnails Views: N/A

  • Issue#46793: Radio Control - goblin 380 bnf

    for sale is my like new goblin 380 bnf BK servos all around talon 90 esc Xnova Tareq edition motor like new only 10 flights on it spektrum AR7200 FBL $800 shipped Attached Thumbnails Views: N/A Views: N/A Views: N/A Views: N/A Views: N/A Views: N/A Views: N/A Views: N/A Views: N/A

  • Issue#48386: Radio Control - X8R Range Issue

    I am aware that this topic has been raised in several different forums but after hours of reading I still do not have a clear picture of how to resolve it in my particular case. I have X8Rs in several fixed wing aircraft bound to a Taranis 9X Plus transmitter running OpenTX in D16 mode, all of which meet range tests comfortably and fly with plenty of operating range. I also have an X8R in a small quad which I first flew bound to an XJT module in a Turnigy 9X running Er9x, again in D16 mode. It did not take long for me to realise that the quad had a serious range problem, with complete loss of normal signal at about 60-70 metres. I first thought that this was due antenna setup but more careful orientation yielded no improvement. At that point I started researching X8R range issues on the internet and found lots of questions but no clear answers. Most of the discussion was around the Taranis/X8R combination. Out of curiosity I switched transmitters over to the Taranis with no notic